semi truck and trailer fleet painting

CUSTOMER SERVICE AND FEEDBACK Have a Question? Message Us GIVE US FEEDBACK MY LOCATION TAMPA, FL View Location Details (800) 306-4002 6130 Lazy Days Boulevard, Tampa, FL 33584 VIEW ALL LOCATIONS

Title: Maintaining the High Gloss Paint Job on Your Aging RV or Motorhome

Intro: When you own an older RV or motorhome with a high gloss paint job, it’s essential to invest some time and effort into maintaining that showroom shine. Neglecting your vehicle’s exterior can lead to fading, cracking, and a worn-out appearance. In this guide, we’ll walk you through the steps to preserve your RV’s paint job and keep it looking stunning for years to come.

Step 1: Assess the Condition of Your Paint

Before diving into maintenance, assess the condition of your RV’s paint. Look for any signs of oxidation, fading, or scratches. If the paint is in poor condition, you may need to consider sanding it down to restore its luster.

Step 2: Prepare for Sanding (if necessary)

If you determine that sanding is required, gather the following materials:

  • 800-grit sandpaper

  • Masking tape

  • Plastic sheeting to protect decals

Carefully mask off any areas with decals to avoid damaging them during the sanding process.

Step 3: Sanding the Surface

With your RV properly masked, use the 800-grit sandpaper to sand the entire surface gently. Sand in a consistent, even pattern, being cautious not to apply too much pressure. The goal here is to create a smooth surface for the subsequent steps.

Step 4: Fine Rubbing Compound

After sanding, it’s time to restore the gloss. Use a fine rubbing compound like the 3M Purple 1-gallon bottle. Apply the compound with a soft cloth or buffer and work it in circular motions. This will help remove any imperfections and bring back the shine to your RV’s paint job.

Step 5: Carnauba Wax Mixture

To protect the newly restored surface, create a carnauba wax mixture. Mix the carnauba wax with water and pour it into a spray bottle. Use this mixture to clean off any residue left from the rubbing compound. Avoid using soap at this stage, as it can undo the work you’ve done so far.

Step 6: Polish Away Swirl Marks

To further enhance the finish, use a black polish designed to remove swirl marks. Apply it evenly across the surface and buff it until the surface appears flawless.

Step 7: Apply a Poly Sealant

For long-lasting protection, use a high-quality poly sealant, such as the one provided by 3D Detailing Supplies. Apply the sealant according to the manufacturer’s instructions, ensuring even coverage across the entire motorhome.

Step 8: Regular Paste Wax Application

To maintain the protective layer and ensure your paint job’s longevity, apply a paste wax once a month for the next year. This routine will build a thick and robust protective barrier over time.

Conclusion: By following these steps, you can breathe new life into the high gloss paint job of your aging RV or motorhome. Regular maintenance and care will not only preserve the clear coat and fiberglass but also keep your vehicle looking as good as new for many adventures to come. Remember, a little effort now can save you from costly repainting in the future.

By JuanChetto

www.juanchetto.com

Leave a Reply

Your email address will not be published. Required fields are marked *

Translate »